1 blink abnormal AU Power Voltage 2 blink abnormal d5v/a9v power voltage 3 blink Abnormal panel voltage 4 blink backlight failure 5 blink abnormal main power voltage 6 blink abnormal speaker voltage 7 blink internal temp. rise 8 times ic5000
1. Unplug the television's electrical cord from the wall outlet.
unplug powercord for 5 mins then factory reset tv
2. Point the remote control at the television, and press and hold the "Up Arrow" button. At the same time, press and release the "Power" button on the television. Your television will reset to its factory settings, and the red light will no longer blink.
0 no red standby light-check powercord or bad main logic board or power board, check standby volts 1 red blink not used 2 red flashes is bad power board, solution replace power board 3 red flashes is bad main logic or power board, check for standby volts if ok replace main logic board 4 red blinks- can be LD board or main logic board, check inverter board wires for arcing to ground 5 red flashes- bad lcd panel connection or internal lcd short- squeeze bezel to locate bad connection
6 red flashes- backlight issue, bad main board, or power board or inverter boards- check standby volts on power board. "backlight on" volts should be 3-5v from main logic board then 24v to inverter 7 red flashes- main board over heating, can be short on power board or main logic board 8 red flashes- main board sp prot, try power reset, update with usb, or replace main logic board 9 blinks- check fan error, * if TV has fans 10 blinks- digital board or tuner board * some Sony TVs may not have this board
11 red flashes- bad main board, bad IC, replace main logic board 12 red light flashes is tcon error bad T-con board or bad LCD panel, replace tcon board usually 13 red flashing is backlight balance error bad lcd panel or inverter boards (common) or bal board on kdl-52v4100 only, replace inverter board usually then main logic board 14 red flashes HFR- bad TCON or Bad LCD panel, replace tcon board. unplug tcon board if tv stays on without tcon board replace tcon board. share this post to anyone in need. get parts at Shopjimmy or Rivervalley electronics.